NARROW STILE EXIT DEVICES TH1100ED
Global Series TH1100-ED
“crash bar” style exit devices are suitable for narrow, medium or wide stile aluminum and hollow metal doors. It is handed with a contoured cross bar that will fit doors up to 42” wide and can be field sized to accommodate narrow doors.
Grade - ANSI A156.3 Grade 2
Warranty - 10 years
Specifications:
- MATERIAL: Contoured anodized aluminum cross bar, stainless steel springs
- LATCH CASE: 1 1/4” wide x 7 1/4” long with 1/2” stainless throw
- BACKSET: 1 5/32” from edge of door to center line of device
- STRIKE: Rim mounted roller strike with shim
- PROJECTION: 4 3/4”
- STILE: 1 7/8” minimum
- HANDING: Handed, please specify RH or LH
- DOOR THICKNESS: 1 3/4” standard
- DOOR WIDTH: Up to 42”, it can be field sized
- MOUNTING HEIGHT: Recommended installation at 39 13/32" from floor to center line of latch or strike assemblies
- FASTENERS: Furnished with sheet metal, machine screws and shoulder mounting studs with set screws
- CYLINDER: Accepts rim cylinder only
- DOGGING: Inside - push up dog pin rotate with screwdriver, Outside - by key cylinder
- FINISHES: Aluminum and Duronotic
Click here to view Exit Device Trims
CONCEALED VERTICAL ROD TH1100-CVR
Global Series TH1100- CVR panic devices blend the utility of a vertical rod application with the appearance of a traditional panic device. It is non-handed and reversible with a contoured cross bar that will fit doors up to 42” wide and can be field sized to accommodate narrow doors.
Grade - ANSI A156.3 Grade 2
Warranty - 10 years
Specifications:
- MATERIAL: Contoured anodized aluminum cross bar, stainless steel springs
- LATCH CASE: 1 1/4” wide x 7 1/4” long
- DOOR HEIGHT: 7’ standard
- BACKSET: Center template on narrow door stile
- STRIKE: Top - flat mortise, Bottom - flat mortise or directly through threshold
- PROJECTION: 4 3/4”
- STILE: 1 7/8” minimum
- HANDING: Reversible, non-handed
- DOOR THICKNESS: 1 3/4” standard
- DOOR WIDTH: Up to 42”
- MOUNTING HEIGHT: 35 11/16” from floor to center line of the bottom latch case mounting stud
- FASTENERS: Furnished with sheet metal, machine screws and shoulder mounting studs with set screws
- CYLINDER: Accepts mortise type
- DOGGING: Inside - push up dog pin and rotate with screwdriver, Outside- by key cylinder
- FINISHES: Aluminum and Duronotic
Click here to view Exit Device Trims
Please click here to view our complete Exit Devices catalog.
