Touch Bar Exit Devices : Entry Levers : Globaldoor.com

TOUCH BAR EXIT DEVICES

TH1100EDTBAR - TOUCH BAR

Global Series TH1100EDTBAR “touch bar” style exit devices are suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. Manufactured of extruded anodized aluminum, the TH1100EDTBAR is durable enough for the most demanding applications. A rim cylinder is included, and the EDTBAR can also be used in conjunction with any of the exit device trims listed below.

Specifications

MATERIAL: Extruded anodized aluminum push bar, stainless steel springs
LATCH: Stainless Steel, 3/4” throw - 5/8” deadlatch
BACKSET: 2 3/4” Covers 161 prep, includes latch & strike filler plates
STRIKE: Surface mounted for 5/8” stop with shim
PROJECTION: 2 1/2” – 1 7/8” dogged
STILE: 4 1/4” minimum
HANDING: Reversible, non-handed

DOOR THICKNESS: 1 3/4” standard
DOOR WIDTH: 36”, can be field sized to 30”
MOUNTING HEIGHT: Recommended installation at 41" from finished floor to center line of push rail.
FASTENERS: Furnished with sheet metal and machine screws
CYLINDER: Rim included, all key trims cylinder included except PLED
DOGGING: 1/2 turn hex key
FIRE RATED: Available - please specify
FINISHES: Aluminum, Duronotic, and Stainless Steel

TH1100EDSV - SURFACE VERTICAL ROD

Global Series TH1100EDSV Surface Vertical Rod panic device is the perfect choice for double doors without mullions. Reversible for right or left hand doors, they are ideal for new construction or renovations. Our EDSV panics can be used in conjunction with any of our exit device trims listed below.

Grade - ANSI A156.3 Grade 2

Warranty - 10 years

Specifications

MATERIAL: Extruded anodized aluminum push bar, stainless steel springs
LATCH: Top pullman type, Bottom bolt assembly
DOOR HEIGHT: 7’ standard
BACKSET: 2 3/4” on 4 1/2” minimum stile width - if less than 4 1/2" backset becomes half of the exposed stile width
STRIKE: Top - surface mounted, Bottom - flat mortise or into threshold, vertical/rim application use DBLST double dr. strike
PROJECTION: 2 1/2” – 1 7/8” dogged
STILE: 4 1/2” minimum

HANDING: Reversible, non-handed
DOOR THICKNESS: 1 3/4” standard
DOOR WIDTH: 36”, can be field sized to 30”
MOUNTING HEIGHT: Recommended installation at 41" from finished floor to center line of push rail.
FASTENERS: Furnished with sheet metal and machine screws
CYLINDER: Accepts rim, all trims Schlage “C” keyway
DOGGING: 1/2 turn hex key
FIRE RATED: Available - please specify
FINISHES: Aluminum, Duronotic, and Stainless Steel

NARROW STILE EXIT DEVICES

TH1100-ED NARROW STILE

Global Series TH1100-ED “crash bar” style exit devices are suitable for narrow, medium or wide stile aluminum and hollow metal doors. It is non-handed and reversible with a contoured cross bar that will fit doors up to 42” wide and can be field sized to accommodate narrow doors.

Grade - ANSI A156.3 Grade 2

Warranty - 10 years

Specifications

MATERIAL: Contoured anodized aluminum cross bar, stainless steel springs
LATCH CASE: 1 1/4” wide x 71/4” long with 1/2” stainless throw
BACKSET: 1 5/32” from edge of door to center line of device
STRIKE: Rim mounted roller strike with shim
PROJECTION: 4 3/4”
STILE: 1 7/8” minimum
HANDING: Handed, please specify RH or LH
DOOR THICKNESS: 1 3/4” standard

DOOR WIDTH: Up to 42”
MOUNTING HEIGHT: Recommended installation at 39 13/32" from floor to center line of latch or strike assemblies
FASTENERS: Furnished with sheet metal, machine screws and shoulder mounting studs with set screws
CYLINDER: Accepts rim cylinder only
DOGGING: Inside - push up dog pin rotate with screwdriver, Outside - by key cylinder
FINISHES: Aluminum and Duronotic

*For Left Hand Reverse Door; order RH device

*For Right Hand Reverse Door; order LH device

TH1100-CVR CONCEALED VERTICAL ROD

Global Series TH1100-CVR panic devices blend the utility of a vertical rod application with the appearance of a traditional panic device. It is non-handed and reversible with a contoured cross bar that will fit doors up to 42” wide and can be field sized to accommodate narrow doors.

Grade - ANSI A156.3 Grade 2

Warranty - 10 years

Specifications

MATERIAL: Contoured anodized aluminum cross bar, stainless steel springs
LATCH CASE: 1 1/4” wide x 7 1/4” long
DOOR HEIGHT: 7’ standard
BACKSET: Center template on narrow door stile
STRIKE: Top - flat mortise, Bottom - flat mortise or directly through threshold
PROJECTION: 4 3/4”

STILE: 1 7/8” minimum
HANDING: Reversible, non-handed
DOOR THICKNESS: 1 3/4” standard
DOOR WIDTH: Up to 42”
MOUNTING HEIGHT: 35 11/16” from floor to center line of the bottom latch case mounting stud
FASTENERS: Furnished with sheet metal, machine screws and shoulder mounting studs with set screws
CYLINDER: Accepts mortise type
DOGGING: Inside- push up dog pin and rotate with screwdriver, Outside- by key cylinder
FINISHES: Aluminum and Duronotic

*For exterior key application must order TH1100-CVRPAD. Insert mortise cylinder in mounting trim and secure with locking ring nut, included.